Sunday, October 03, 2010

Fluorescent Tube Light Driver Circuit Diagram(10W)



This is very useful circuit for us.Because we can light up 10W Fluorescent lamp by using this circuit diagram.This circuit operates with single transformer.I suppose now you can enjoy this inverter.When you wind the transformer do it carefully because that is the heart of this circuit.








Note

# Be careful when you operate this circuit because high voltage is dangerous.
# This circuit is not good for kids

6 comments:

  1. Hi, basically I got this fish tank from my friend and the tube light in the tank doesnt seems to be working hence after some research I've found the driver circuit is faulty and that the lamps are 10W this circuit seems the right fit however as I live in uk and its 240V. I have very little knowledge of electronics but have a very keen liking for circuit buildings could one of you guys please help me with all the componets used here and how can I go about making it work in my country...please send any reply to my email: aaijay@gmail.com...very much appreciated..thanks

    ReplyDelete
    Replies
    1. aaijay@
      gmail.com. Did u get an answer, its an old thing?

      Delete
  2. please give the ratings of the components are using example

    resistance r1= 100ohm
    capacitors c1=0.04uf
    lick that thanks for reading

    ReplyDelete
  3. This comment has been removed by the author.

    ReplyDelete
  4. i like your this nice blog really i found it very informative and good one for us so keep it up dear and i would like to thank you for sharing it with us flashing led lights

    ReplyDelete
  5. Can u please explain the circuit. What is the use of the inductor at the base? does it do some switching through mutual coupling? If yes, how?

    Thanks in advance.

    ReplyDelete